Nawghane, ChinmayChinmayNawghaneCauwe, MaartenMaartenCauweVan De Slyeke, MarnixMarnixVan De SlyekeHeltzel, StanStanHeltzel2026-11-162026-11-162026979-8-3315-6250-22833-8553https://imec-publications.be/handle/20.500.12860/60827High-Density Interconnect (HDI) printed circuit boards (PCBs) rely on stacked and staggered microvias to achieve compact, high-performance interconnects. However, the thermo-mechanical reliability of these microvias remains a critical concern due to cyclic stresses induced by mismatched coefficients of thermal expansion (CTE) between copper and dielectric materials. This study investigates the strain behavior of multilevel microvia configurations using finite element analysis (FEA) under reflow thermal cycling from 20 °C to 230 °C. A unit-cell modeling approach is employed to simulate various microvia offsets relative to a core via, ranging from fully stacked to fully staggered arrangements. Results reveal that partially overlapped microvias particularly those offset by ±100 μm exhibit the highest strain concentrations, exceeding those in fully stacked configurations. These key offsets occur when microvias with a top diameter of 150 μm and a bottom diameter of 100 μm partially overlap, causing increased stress at their interface. These findings highlight the detrimental impact of misregistration-induced partial overlaps and underscore the importance of avoiding overlap in staggered designs. Ongoing thermal cycling experiments on HDI test coupons are being conducted to validate the simulation results through cross-sectional failure analysis. The study provides actionable insights for optimizing microvia placement to enhance the reliability of HDI PCBs in high-performance applications.engOptimizing Multilevel Microvia Structures for Thermo-mechanical Reliability in High-speed HDI PCBsProceedings paper10.1109/eurosime69483.2026.11511984WOS:001900864700102